If your building was built prior to 1980 and is heated by hot water or steam radiators/ convectors, you are losing a significant amount of heat through the un-insulated exterior wall.

Use this product in the entire building or solve the problems with those apartments that frequently complain about a lack of heat when others are hot or comfortable. 

Novitherm Heat Reflectors reduce heat and energy loss by ensuring that most of the heat from your heating unit is passed into the room and not into the exterior wall.  

The aluminized surface reflects over 90% of the infra-red heat, normally absorbed by the wall behind the heating units, back into the room. This immediately improves comfort levels and reduces your heating requirements.  

The molded shape of the Heat Reflector traps air between the Heat Reflector and the wall surface. This creates a thermal barrier which reduces conductive heat loss to the exterior wall. The saw tooth profile of the Heat Reflector, increases air turbulence and circulation which improves room comfort.  

With the Heat Reflectors installed, the core of your heating unit is hotter and returns the water inside the system to the boiler at a higher temperature. This allows you to reduce the overall boiler water temperature to achieve the same or improved comfort levels. The reduction of the boiler water temperature reduces the amount of fuel required to re-heat the water, and you will save money.

Fire Resistance
The Heat Reflectors have been tested for smoke and flame spread by the Underwriters Laboratory of Canada (ULC) and rated in accordance with the following standards:
CAN/ULC-S102M (flame @ 30; smoke @ 60 to 85)
ASTM E84 (flame @ 15 to 40; smoke @ 105 to 135)

Toxicity
When tested in accordance with draft EEC Document EN71, the Heat Reflectors were found to be safe to use where they would be accessible to children.

Emissivity
Heat Reflectors are opaque to thermal radiation with a thermal reflectance of 90% to 92%.