grn bnnr

Intellidyne Guarantee

ECS and Intellidyne are so confident that the IntelliCon products offered will reduce your energy consumption by a minimum of 10% in the first year, or we will refund your entire purchase price if we are unable to attain these savings. Ask you sales rep for details.

Green Team Member


ECS is an official partner with ConEd to maximize the incentives available for our products and services.

IntelliCon CHS

CHSIntelliCon®-CHS is a microprocessor-controlled fuel-saving device for commercial steam heating systems. IntelliCon-CHS reduces: fuel consumption, wear on parts, fuel emissions, and electrical usage, when installed on any new or existing gas or oil burner. IntelliCon-CHS saves energy by adjusting the burner run pattern to match the system's "heat load." Its action is similar to the industry-accepted method of "outdoor-air temperature reset control," but does not require an outdoor-air temperature sensor or the need to profile the building in order to adjust the "reset" controller properly. IntelliCon-CHS determines the "heat load" by using an easily installed pressure sensor that monitors the boiler's steam-pressure and the rate that this pressure is changing.

Any heating system must be able to provide acceptable comfort at the lowest anticipated outdoor temperature. In the U.S. and abroad, most light commercial boilers have a heat capacity between 1.5 to 2 times larger than that needed to maintain the facility's temperature on those extreme days. Due to this over-sizing of the boiler, the burner will cycle on and off continuously to maintain the desired steam pressure.

energy starUsing our patented technology, IntelliCon®-CHS increases "system efficiency" thus the heating system uses less fuel to generate the same amount of heat. This is done by dynamically changing the pressure-controller's effective dead-band based upon the measured "heating load." This causes the average steam pressure to be varied (depending upon the measured load), and is accomplished by extending the burner's "off-time." Extending the "off-time" also results in longer burns that are more efficient and a reduction in burner on/off cycling. Just as computer control has increased the gas mileage of automobiles: IntelliCon-CHS improves the fuel utilization of heating systems, by supplementing the antiquated on/off control action of the pressure-controller with the analysis and control capabilities of a computer.

Service personnel will appreciate the LCD readout, which displays useful information relative to the unit's status, steam pressure and domestic hot-water temperature (if the optional sensor is installed), which can be useful for system diagnostics and maintenance.

IntelliCon-CHS typically reduces fuel consumption 10% to 20% and decreases burner cycling 30% or more. The unit does not require any programming or adjustments and after installation, IntelliCon-CHS requires no maintenance.


  • Patented process reduces fuel consumption -typically 10% to 20%
  • Short payback period - typically 4 to 18 months
  • UL listed (pending), "Energy Management Equipment"
  • Increased savings without replacing or upgrading costly system components
  • "State-of-the-art" microcomputer controller
  • Easily installed plug-in sensor's)
  • Illuminated LCD display shows operating modes, diagnostics, system temperatures
  • Fail-safe operation
  • No programming or follow-up visits required
  • Maximum efficiency year-round
  • Reduces maintenance and extends boiler life
  • Guaranteed to reduce fuel consumption
  • 15-year replacement warranty for breakdowns or defects